Colin Jeffrey discovered technology at an early age, pulling apart clocks, radios, and the family TV. Despite his father's remonstrations that he never put anything back together, Colin went on to become an electronics engineer. Later he decided to get a degree in anthropology, and used that to do all manner of interesting things masquerading as work. Even later he took up sculpting, moved to the coast, and never learned to surf.
目前瑞士聯邦材料測試與開發研究所（EMPA）的研究團隊開發出一種新的蓄熱技術，能夠將夏天的熱量儲存起來、迅速而容易地供冬天取暖使用，并且可以運輸到任何需要的地方。該新技術采用濃縮的氫氧化鈉（NaOH）作為蓄熱媒介，并采用了大量易獲得的成分，來捕獲、轉化、釋放熱量以滿足需求。
Though still in the prototype stage, EMPA is currently looking for commercial partners to assist in creating a compact version of the system for household domestic use(Credit: EMPA)
Making the move away from using fossil fuels for heating is a necessary part of creating a sustainable future, but it's often a difficult ask for many people when turning up a thermostat on a gas or electric heater provides instant, trouble-free warmth. If people are to be convinced to switch to more renewable sources, it makes sense that there need to be easy-to-use systems available to encourage them to do so. A group of Swiss researchers claim to have come up with a process that stores heat captured during summer for easy, flick-of-a-switch use in winter, with the added benefit that the captured energy can be physically transported anywhere it may be needed.
Created by researchers working at EMPA (Eidgenössische Materialprüfungs-und ForschungsAnstalt or, in English, the Swiss Federal Laboratories for Materials Testing and Research), the new system uses concentrated sodium hydroxide (NaOH) as the thermal storage medium, and a collection of largely off-the-shelf components to capture, convert, and release heat energy on demand.
To achieve this, the researchers rely on the fact that when water is poured onto dry sodium hydroxide an exothermic reaction ensues, where the chemical energy contained in the NaOH is released as heat. As NaOH is also extremely hygroscopic (that is, having a great attraction for dragging in and holding water molecules from the surrounding environment), more heat is produced from water condensing from vapor in the air and the sodium hydroxide solution is heated even further. In this way, large amounts of heat may be liberated from NaOH simply by the addition of water.
Conversely, if heat energy (collected from the sun, for example) is fed into a solution of sodium hydroxide diluted with water, the moisture readily evaporates and the NaOH solution becomes more concentrated and, therefore, effectively stores the supplied energy. This concentrated mixture may then be kept stored for many months (even years), until the heat is once again liberated when the NaOH is exposed to water again. The solution can also be easily transported in tanks to other areas where heat energy is needed.
In practice, the storage medium is a viscous liquid composed of a 50 percent NaOH solution that is made to trickle along in a spiral pipe (created from heat exchangers normally found in instantaneous water heaters), where it soaks up water vapor along the way and then conveys the generated heat into the pipe. The heat is then free to radiate, convect, and conduct into the area requiring warmth.
During this process, the sodium hydroxide solution cascades down the outside of the heat exchanger spiral, where it is diluted to around 30 percent in the steamy atmosphere of the inside of the system, and the water temperature within the pipe rises to around 50° C (122° F). Which, in a happy coincidence, makes it ideal for under floor heating.
The reverse of this process – passing heat through the medium to store energy – has also been demonstrated in the system. Specifically, the moisture from the NaOH solution evaporates when heat is applied, which is then siphoned off and condensed. The solution that exits the heat exchanger is now back up to 50 percent strength, and "charged" with heat energy. The researchers suggest that the heat for this step could be renewably produced using solar collectors (similar to those used in solar-powered air conditioning systems).
The heated water generated in the process of condensation is then transferred to a geothermal probe (generally loops of pipes embedded vertically in the ground) for storage and retrieval. After the stored condensation's temperature has dropped to somewhere between 5 and 10° C (41 to 50° F) it is returned to the apparatus to drain the store.
Though still in the prototype stage, EMPA is currently looking for commercial partners to assist in creating a compact version of the system for household domestic use.
The EMPA heat storage device is one of three competing systems in the COMTESproject, which has the goal to develop and demonstrate compact seasonal storage of solar thermal energy.
